Hello
We have executed adacnv utility to past adabas version from 8.2 to 8.3
After this operation, our merge job (full + delta save) return code u0034
You found all informations below (Jcl and return)
We have prospected many ideas without result
The offline full save and delta save works fine
Only the merge doesn’t works
Have you an idea to correct the problem ?
Brgds
XXADASAV EXEC PGM=ADARUN,REGION=0M
XXSTEPLIB DD DISP=SHR,DSN=ADASYS.AF.TP.ADA831.LOADLIB
XXDDASSOR1 DD DISP=SHR,DSN=ADATP.ADAB10.ASSOR1
XXDDASSOR2 DD DISP=SHR,DSN=ADATP.ADAB10.ASSOR2
XXDDDATAR1 DD DISP=SHR,DSN=ADATP.ADAB10.DATAR1
XXDDDATAR2 DD DISP=SHR,DSN=ADATP.ADAB10.DATAR2
XXDDDATAR3 DD DISP=SHR,DSN=ADATP.ADAB10.DATAR3
XXDDDATAR4 DD DISP=SHR,DSN=ADATP.ADAB10.DATAR4
XXDDDATAR5 DD DISP=SHR,DSN=ADATP.ADAB10.DATAR5
XXDDDATAR6 DD DISP=SHR,DSN=ADATP.ADAB10.DATAR6
XXDDWORKR1 DD DISP=SHR,DSN=ADATP.ADAB10.WORKR1
XXDDDSIMR1 DD DISP=SHR,DSN=ADATP.ADAB10.DSIMR1
XXDDCARD DD *
ADARUN DATABASE=010,DEVICE=3390,SVC=214,PROG=ADASAV,DSF=YES
XX*
XXDDKARTE DD *
ADASAV MERGE PATTERN=DD
ADASAV DSIMDEV=8391
XXSYSMDUMP DD DISP=(,CATLG,CATLG),DSN=G110.COU.DUMP,
XX SPACE=(CYL,(100,100),RLSE)
XXDDDEL1 DD DISP=SHR,DSN=MAINT.ADAB10.MERGE(-1),
XX DCB=BUFNO=90
XXDDDEL2 DD DISP=SHR,DSN=MAINT.ADAB10.MERGE(-0),
XX DCB=BUFNO=90
XXDDSAVE1 DD DSN=MAINT.ADAB10.MERGE(+1),DISP=(,CATLG,DELETE),
XX DCB=(AAABIDON,BUFNO=90),UNIT=CART,
XX VOL=(,,,21) Sysout
The following parameters are in use for this run :
ADARUN DATABASE=010,DEVICE=3390,SVC=214,PROG=ADASAV,DSF=YES
ADARUN PLOGRQ=NO
ADARUN MODE=MULTI
The following programs are in use for this run :
ADARUN RUNMVS Date 2014-06-21, Version 8.3, SP 1
Zaps AO831013 AO831014
RUNIND Date 2014-07-09, Version 8.3, SP 1
Zaps AI831020
ADAMSG Date 2014-06-21, Version 8.3, SP 1
ADAIOR Date 2014-06-30, Version 8.3, SP 1
Zaps AO831004
ADAIOS IOSMVS Date 2014-07-06, Version 8.3, SP 1
Zaps AO831004 AO831005 AO831006 AO831007 AO831010
AO831011 AO831012
IOSIND Date 2014-07-06, Version 8.3, SP 1
Zaps AI831004 AI831006 AI831012 AI831014 AI831017
AI831018
ADASAV Date 2014-07-06, Version 8.3, SP 1
Zaps AU831017 AU831038 AU831078
ADARAC Date 2014-06-21, Version 8.3, SP 1
ADAMG0 Date 2014-06-21, Version 8.3, SP 1
ADAMG8 Date 2014-06-21, Version 8.3, SP 1
ADAMGA Date 2014-06-21, Version 8.3, SP 1
ADAMGI Date 2014-06-21, Version 8.3, SP 1
ADAMGM Date 2014-06-21, Version 8.3, SP 1
Zaps AU831030
ADAMGN Date 2014-06-21, Version 8.3, SP 1
ADAMGR Date 2014-06-21, Version 8.3, SP 1
ADADSFS Date 2014-06-20, Version 8.3, SP 1
Zaps AL831003
ADAMGS Date 2014-07-08, Version 8.3, SP 1
Mode = MULTI
DBID = 00010
Device = 3390
SVC = 214
AMODE = 31
09:15:42 ADAI65 00010 EXCPVR is being used for this run in ESA64 mode
09:15:42 ADAI64 00010 File DDASSOR1 is being opened in ECKD mode
09:15:42 ADAI64 00010 Block size 2,544 RABN range 1 to 5,063,292
09:15:42 ADAI64 00010 File DDASSOR2 is being opened in ECKD mode
09:15:42 ADAI64 00010 Block size 2,544 RABN range 5,063,293 to 5,603,292
09:15:42 ADAI64 00010 File DDDSIMR1 is being opened in ECKD mode
09:15:42 ADAI64 00010 Block size 18,452 RABN range 1 to 45
DSF036 DSIM Dataset opened with status: NOT IN USE
09:15:42 ADAI03 00010 DDDSIMR1 1 read
09:15:42 ADAI03 00010 DDDSIMR1 0 writes
ADAU13 00010 VOLSER for DDDEL1 = Z01960
ADAU13 00010 VOLSER for DDDEL2 = Y19137
ADAU13 00010 VOLSER for DDSAVE1 = Z04632 RABN 2
A D A S A V V8.3 SP1 DBID = 00010 Started 2016-01-25 09:15:41
Parameters:
-----------
ADASAV MERGE PATTERN=DD
ADASAV DSIMDEV=8391
DSF045 Input OFFLINE DELTA Save tape opened
DSID = 12 / 1 - 1 / 2016-01-25 05:29:49
DSF045 Input OFFLINE DELTA Save tape opened
DSID = 12 / 2 - 2 / 2016-01-25 08:30:19
A D A S A V: Error occurred during execution:
ERROR-099, Internal error at ADASAV+002D24
Register contents at time of error:
R0-R3 00000000 000002F6 8005FF8E 1F861BA0
R4-R7 00000015 00002D24 36003300 1B4BB010
R8-R11 1B41C3D8 0005FE10 8005B000 0005C000
R12-R15 0005D000 8005CACC 00000002 009C3F5C
Inform your DBA.
A D A S A V Terminated 2016-01-25 09:15:43